Specification:
Common name:   Glyphosate
FORMULA: C3H8NO5P                                                                     
M. W.: 169.08                                                                                        
CAS NO.: 1071-83-6 
Specification: 95%TC, 30%&41%SL, 88.8%WSG
Physical & Chemical Properties 
Color: White 
Physical state: Crystal powder
Odor:  Odorless
Melting point: 184.5 °C
Boiling point: decomposition at 187 °C;
Decomposition point: 187 °C;
Corrosion properties: Non corrosive
Vapor pressure: 0.75mPa at 25ºC
Density: 1.704 at 20 °C;
Solubility in water and organic Solvents (at stated temperature):
In water: 10-100 mg/litre at 20 °C;
In organic solvents: insoluble in common organics.
Partition coefficient between Water and appropriate non-Miscible solvent e.g. n-octanol Coefficient (octanol number): log Kow = - 3.2 to -2.8 (pH 7)
Toxicity      
Oral LD50   Rat       4230mg/kg >5000mg/kg
Dermal LD50      Rat       >2000mg/kg >2000mg/kg
Inhalation LC50  Rat >4.43 mg/l (4 h)           >10.0 mg/l
Skin irritation      Rabbit   Non-irritating      Slightly irritanting
Eye irritation       Rabbit   Non-irritating      Slightly irritanting
Skin sensitization       Guinea pig       No sensitizing      No sensitizing

APPLICATIONS:

Mode of action: Non-selective systemic herbicide, absorbed by the foliage, with rapid translocation throughout the plant.Inactivated on contact with soil. 

Uses: Control of annual and perennial grasses and broad-leaved weeds, pre-harvest, post-planting/pre-emergence and in stubble, in cereals, peas, beans, oilseed rape, flax and mustard; as a directed spray in vines and olives; in orchards, pasture, forestry and industrial weed control. 

Scope and Method of application:

- CROP: rubber tree farm, fruit farm, vegetable farm, non-crop land.

- PESTS: annual and perennial grasses and broad-leaved weeds

- Dose Rate: 1600g/ha to 3700g/ha.

- Method of Application: Dilute the product at recommended rate with 320 to 450 liters of water.

Mixing and dilution: Pre-mix the required amount of Glyphosate ammonium 757g/kg WSG with a small volume of water to create slurry without lumps. Then half fill the spray tank with clean water and add this pre-mixed slurry to the tank. Agitate until mixture is well suspended. Then fill the spray tank to the final water level. Continue agitation during spraying until the tank is completely empty.

    Spray immediately after mixing